When you buy a thread protector, most suppliers provide users manual, which you have to read and understand all the information therein. The information contained in the manual often relates to descriptions and instructions to help you achieve the best results from your protector.
Since there are many suppliers in the market, it is important that you work with a reliable company that supplies a wide range of pipe thread protectors. With a reliable supplier, you may get additional information on how you can use thread protector for the best results, as well as what you can do to avoid damage. All the same, using thread protectors involve the following three stages:
Mounting the protector
At the time of selection, you need to select an appropriate size of thread protector for the pipe. If the sizes do not match, you fill find it difficult to mount the protector as required. Before you mount, wipe any excess dust, grease, and dirt that may be on the pipe thread.
Thread protectors are available in different designs such as Tector and more. You need to know which type you work with and if it is easy to clamp and unclamp. If it needs clamping, do that and slide the protector over the pipe. Ensure the protector is in the right position and engage the clamp accordingly.
After clamping the protector in the right place, the clamping handle should be in parallel position to the pipe’s cross section to avoid causing any obstruction or slipping out of place.
Adjusting the protector
Used in oil drilling equipment or other tubular goods, thread protectors can become too loose for the pipe on which they are used. In such circumstances, you may need to do a little adjustment so the protector can stay in position. Simply unclamp the protector and use a socket wrench of the right size to loosen or tighten the adjustment nut.
If the protector is loose on the pipe threads, rotate it in a clockwise direction. On the other hand, if the clamping handle does not close completely, rotate the protector in an anticlockwise direction. The adjustments need to take place at small increments of just no more than two complete rotations of the nut at any given time.
If you adjust the protector but it fails to achieve a proper fit, check again whether the sizes of the protector and the pipe threads match. If they match but still no proper fit is achieved, the protector may have passed its useful life and therefore needs replacement.
Disassembling the protector
When you have to remove the protector, check for valuable information in the user’s manual about how to disassemble it. In most cases, it involves removing the adjustment completely and removing the nut and the washer. However, it is advisable to get appropriate information from the user’s manual because the protectors are different in sizes and design, including screw thread protectors.
Buying the right thread protector for pipes is the best way to protect the threads from damage, especially if the pipes have to move from one place to another before they are used. For the best thread protectors you can check http://essentrapipeprotection.com/products/